////////////////\\\\\\\\\\\\\\
  ////////Arduino test plate\\\\\\
  //////////////\\\\\\\\\\\\\\\\\\\
 ///  written by: Peter Trinkaus \\\\
/////////////////\\\\\\\\\\\\\\\\\\\\\\

int analog0, analog1, analog2, analog3, analog4, analog5;

void setup()   
{     

  Serial.begin(9600);

  for(int i=2; i<14; i++)
  {
    pinMode(i, OUTPUT);     
  }
  
  for(int i=2; i<14; i++)
  {
    digitalWrite(i, HIGH);
    delay(500);
    digitalWrite(i, LOW);
  }

  digitalWrite(2, HIGH);
  delay(500);
  digitalWrite(2, LOW);
}

void loop()                     
{
  Serial.println("Analog values: ");
  analog0 = analogRead(0);
  analog1 = analogRead(1);
  analog2 = analogRead(2);
  analog3 = analogRead(3);
  analog4 = analogRead(4);
  analog5 = analogRead(5);

  Serial.println(analog0);
  Serial.println(analog1);
  Serial.println(analog2);
  Serial.println(analog3);
  Serial.println(analog4);
  Serial.println(analog5);

  analogWrite(3, (analog0/4));
  analogWrite(5, (analog1/4));
  analogWrite(6, (analog2/4));
  analogWrite(9, (analog3/4));
  analogWrite(10, (analog4/4));
  analogWrite(11, (analog5/4));

  Serial.println(" ");
  delay(200);

}